| Home |
| Search |
| Today's Posts |
|
#15
|
|||
|
|||
|
my reason was make narrow-band antenna. For reject all out of band noise. That is a very worthwhile objective. All that noise adds to the intermod noise and the sooner you can stop it, the better. In my youth I recall calling CQ on 42 mhz for a couple of weeks. Fortunately, a very sharp yagi and very low power saved me from a violation. John Ferrell W8CCW Beware of the dopeler effect (pronounced dope-ler). That's where bad ideas seem good if they come at you fast enough. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| About a narrow filter at 10.7 MHz | Homebrew | |||
| Narrow Band FM bandwidth and channel spacing | Equipment | |||
| Flower Pot Antenna a Dual-Band (20m and 10m) 'portable' Antenna | Shortwave | |||
| Narrow & Wide............ | Shortwave | |||
| Antenna Specialists MON-4 VHF Low Band Scanner antenna - Can I trim it for 6 meter use ? | Antenna | |||