Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() I believe that the physical length of the driven element in a Yagi is much less important than the tuning and spacing of the parasitic elements. The question becomes something like this: what is the relative amplitude and phase of the current in each parasitic element, for some excitation of the driven element? A Yagi is a system of coupled resonators, like a system of coupled pendulums. If one of the pendulums is driven at a particular amplitude and frequency, even if it's not that pendulum's natural frequency, the rest of the pendulums will follow along pretty much the same as if the driven pendulum was tuned to have that natural frequency. In the antenna, the difference will only be in the coupling from the driven element to the others, and I believe that changes only slightly as the length of the driven element changes. But I may be wrong about that, and await my re-education. ;-) But I just ran EZNec on the example "NBS" 3-element 50.1MHz Yagi, varying the nominal 110 inch long D.E. by +/- 10 inches, and saw the expected fairly large variation in impedance, but only 0.02dB change in gain over that whole range, with similarly small variation in F/B ratio and beam width. The longest D.E. I ran was also the highest gain (by that tiny amount), and provided enough inductive reactance that the feedpoint could be tuned to resonance and present 200 ohms by shunting with about 55pF capacitance. Next to try: compare the SWR bandwidths of the hairpin (inductive) shunt of a shortened D.E. and the capacitive shunt of a lengthened D.E.. Unless someone offers a better test case, I'll use the NBS 3 element Yagi... Cheers, Tom Hi Tom, the results you got on EZNEC are encouraging. Nevertheless I would not like to try using a lengthened element in conjunction with a capacitor, as the difference between that configuration and the original configuration would be the maximum (although it would be much easier to adjust a capacitor than the inductance of an hairpin). What puzzles me is that the antenna manufacturer reported me having sold several hundreds of those antennas, and no one has reported him the bandwidth being too narrow or the exagerated wet terrain influence. I am not sure on what I am going to do, also because I am not 100% sure on whether the bandwidth problem is only due to the matching system, or it is also due to the particular antenna design. My original intention was to compare this 50-MHz long Yagi antenna (32-foot boom) against a smaller antenna (11-foot boom) I have on another tower, so as to determine how much a bigger antenna really helps during multiple-hop sporadic openings to US and Japan. Probably for the forecoming sporadic-E season (May-August) I will leave things as they are, and just try to assess the practical advantages of the bigger antenna. After that I will see what I shall do. Thanks very much for the useful discussion. 73 Tony I0JX |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Efficiency of Vertical | Antenna | |||
Efficiency | Antenna | |||
Request for information on phase matching and set / batch matching | Antenna | |||
Yagi Hairpin Match | Antenna | |||
Building a Matching Transformer for Shortwave Listener's Antenna using a Binocular Ferrite Core from a TV type Matching Transformer | Shortwave |