Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Ferrite Bead Installation Guide
Greetings All,
Saw the posts about Mix 31 ferrites, which I use on my mobile installations with good luck, using HiQ 5/160 antenna and Icom IC7000. If anyone is interested, I recently posted on my web site a document the describes the installation of ferrites for HF installations. This is based on what has worked for me, information from Fair Rite's web site, and ideas from various past posings. Also listed is a partial list of suppliers - as always check the prices as they can vary a lot! Check it out and let me know (direct email) if you have any other suggestions and if you find this useful, as this is meant to be a "continous improvement" document. I also plan to write additional guidelines as time permits: www.repdesign.us , go to the "Downloads" page (left side of screen towards the bottom), and go to the third group to download or simply open to read the PDF document. 73, Dick Post, N7EMW www.repdesign.us |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
To RHF et al: More On Ferrite Bead Usage ? | Shortwave | |||
Ferrite Bead Usage On Receive-Only Antenna | Shortwave | |||
Ferrite bead impedance at UHF | Antenna | |||
Ferrite bead balun for UHF? | Antenna | |||
TV type Ferrite Cores / Ferrite Cores / Magnetic Longwire Baluns (MLBs) and more | Shortwave |