Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Gary Smith wrote:
UHF Cb in Australia is in the range of 476.425 - 477.400 MHz. Sorry, i was thinking i was posting in an Australin ng. So i need an antenna to cover 144-148, 430-440 and 476.425-477.400MHz Thanks. Gary ======================================= UHFcb in Oz-land is highly likely similar to PMR446 in Europe and FRS in the USA. PMR446 are 8 RF channels with 12.5 kHz spacing starting at 446.0025 MHz . That means using a Ham radio it must have the capability to be set at 2.5 kHz channel spacing and few if any ham transceivers have that. Also, the deviation is set at a low 1.5 KHz. So I wonder how UHFcb is operated in Australia ........would a Ham radio with extended range be usable ? Frank GM0CSZ / KN6WH |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Odd problem with 6/2/70 triband vertical | Antenna | |||
FS: Kenwood TM-741 Triband Mobile | Equipment | |||
Rotate TriBand to vertical? | Antenna | |||
Kenwood model 741 triband mobile: power-on problem | Equipment | |||
Info on Cushcraft R3 triband vertical | Antenna |