Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have an efficiency question concerning feed lines. My present
system is RG-8X to my 75 meter inverted vee which is about 85 feet away from the shack. I propose to replace some 88 feet of coax with 300 ohm window ladder line that is inserted into the coax run with 4:1 baluns to match the coax on each end. Also at the feed point of the antenna switch from a voltage balun to a current balun (ferrite chock type). By my calculations with a 98 watt generator I will increase the power to the load by about 11-20 watts and with a 985 watt generator, 117-210 more watts will reach the load. Figuring theoretical total system (A) against total System (B) or by just the difference in the 88 feet of ladder line versus coax. What do you think the increase will be? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Using Twin Lead or Ladder Line for your Antenna's Feed-in-Line ? - Then 'consider' a Pair of Vintage Style TV Antenna Clips . . . | Shortwave | |||
Feed Line Length - Ladder Line | Antenna | |||
Coax Length for G5RV and Center Support for Ladder Line ? | Antenna | |||
Ladder Line or Coax For Reception only? | Antenna |