Andy, is your endfed wire the one in your other thread of the 8th June
(ie the 80 Meter End Fed, fed with coax at the far end)? If so,
presumably the tuner is at the shack end. Or are you feeding it from the
shack end.


In message , Andy
writes
Hi Richard,

Just an update for you on my AT1KP tuner.
I am only running 110 watts through the tuner due to not owning an
Amplifier.
I have tried it out on an End Fed wire WITH an earth ground rod that has a
very poor ground and also an End Fed Zep. It still tunes these wires down
to 1.1:1 from 160 - 6 Meters with ease.
I am very pleased with it and I'm glade I purchased the AT1KP. Hope this
helps.

73 Andy


--
Ian