Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I've seen the Lazy H mentioned in many antenna books over the years,
so I decided to try one on 10 meters. According to the ARRL handbook the Lazy H is two collinear elements stacked on above the other, Each collinear element is made up of two 1/2 wave elements. I chose to use 5/8 wave spacing between the top and bottom elements. I connected the top and bottom elements with 450 ohm 16 gauge stranded ladder line (window line). After building the antenna I verified connectivity between the top and bottom right elements and the top and bottom left elements. I color coded the end insulators on each side so I could easily see which top and bottom elements were connected to each other. The antenna book says to connect the 450 ohm ladder line from the antenna tuner to the middle of the 450 ladder line that connects top and bottom elements. Ok done. Now I put up the antenna and make sure the top and bottom elements are in phase. That is both left connected elements are on the left and both right connected element are on the right. I also make sure there is no twist in the ladder line connecting the top and bottom elements. I also checked the other ends of the 450 ohm ladder line feeding the antenna has connectivity at the antenna, and the left and right sides of the ladder line do not have connectivity. The 450 ohm ladder line feeding the antenna is about 200 feet long. Now I bring the 450 ohm feedline in to the house, hook it to my Dentron MT-2000 antenna tuner with the 4:1 balun inside, tune it up, and it sucks! Both my half wave horizontal dipole and my Solarcon Max-2000 blow it away on incoming skip even in the preferred direction of the lazy H. I rechecked my connections and the lengths of the elements and spacing and they are correct. I did take in to account the velocity factor of the 450 ladder line that connects the top elements to the bottom elements. The antenna book says the length of the 450 ladder lien between the antenna and the antenna tuner can e any lenght. The bottom element is at least 1/2 wave of the ground, and the top element is 5/8ths wave above that. What did I do wrong? Michael |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
From NEC2 to the real world with accuracy | Antenna | |||
What is the max power (dBm) a AM receiver can get in the real world? | Broadcasting | |||
IN THE REAL WORLD ANTI GIRLS CAN DO NOTHING TO STOP THIS... | CB | |||
Bode plots in the real world | Homebrew | |||
ARRL on real world BPL tests - devastating effect on the HF bands | Policy |