| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
wrote:
... if it is possible to just physically model the capacitance hat as if it were just additional wire segments. It is certainly possible and is important that the top hat wires be symmetrical around the connection point. Whatever 'N' number of top-hat radials are modeled, the spacing should be 360deg/N. It is easiest to model top-hat radials in powers of 2, i.e. 4, 8, 16, ... There's really no difference between elevated ground plane radials and top-hat radials. -- 73, Cecil http://www.w5dxp.com "According to the general theory of relativity, space without ether is unthinkable." Albert Einstein |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| W8JK station on the air | Antenna | |||
| FA: 1-Day-Left: 3 Pro Books: ELECTRONICS, LOW POWER DIGITAL CMOS DESIGN, Microelectronics, Device Modeling, etc. | Equipment | |||
| FA: 3 Pro Books: ELECTRONICS, LOW POWER DIGITAL CMOS DESIGN, Microelectronics, Device Modeling, etc. | Equipment | |||
| W8JK Passes | Antenna | |||
| 4NEC2 Antenna Modeling Program | Antenna | |||