Owen Duffy wrote in
:


Ed,

You might have expected the feedpoint impedance to be around 70 ohms.
It will depend on the feedline configuration, because you haven't
taken much is the way of measures to decouple the feedline.

Your measured fwd and ref indicates VSWR~=1.5 which is consistent with
70 ohms, but you haven't measured 70 ohms.

Assuming though that such an antenna should be close to 70+j0 at
resonance...

If you did want to incorporate an impedance matching system that
doesn't compromise the portability you have described, you could try a
twelfth wave transformer with 29.3° of 50 ohm coax from the feedpoint,
then 29.3° of 75 ohm coax then any length of 50 ohm coax to the
transmitter.

For example, for 146MHz, that could be 137mm of Belden 9258 (RG8/X)
then 139mm of Belden 1189A (RG6/U) then any length of 50 ohm coax to
the tx.

Owen


Very nice, Owen. Saved me a lot of difficult math.... since I have
those materials on hand I may see what I can throw together tomorrow.

Ed