Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Mark wrote:
WHEEL STATIC ONLY ON SOME PATCHES OF PAVEMENT? WHY? With the financial mess, I have started to listen to AM radio in the car on the way to and from work for the past few weeks and I've noticed some random static at certain locations. At first I attributed this to some power line noise. Bit it didn't really sound like 60 Hz buzz hash, it was more random popcorn like but I know power lines can blow around in the wind and have strange discharges so I didn't think too much of it for a while. But after a few days I noticed that the static is there only when the car is moving. OK, so its wheel static. Static electricity from the wheels or brakes or something. OK that's not unusual either. But it is the combination that has me curious. This static only occurs when the car is moving and it only occurs at certain repeatable locations on my drive. Everyday when I turn the corner from X to Y, I get the static as the car is moving, but not when stopped at the same corner. And I never get the static when turning the corner from A to B. If it was power line, stopping the car wouldn't stop the static. If it is wheel static, why does it not happen all the time and happen only at certain locations. It seems as if these certain locations have something special about the pavement or the water content of the soil or something. None of that seems likely to me though, I see nothing changing in the pavement as I drive from an area of static to an area of non-static. It is not related to stepping on the brake or gas or shifting gears or going over bumps or any other aspect of the car that I can tell other than it's speed down the road. As an experiment, I attached a drag wire under the car. The wire drags on the ground to discharge any static build up the car. This made no difference. Another clue, we've had no rain here in a while. The static all stops during wet weather. Also I am in the Philadelphia area and the AM station is in the New York area so it is on the weak side. I've been a ham for over 30 years and I have a lot of experience with EMI, but this one has me scratching my head. The wheel static changes repeatably in different locations for no apparent reason. It's got to be something to do with the pavement. Anybody have any experience with this? Mark I used to run HF mobile, and had this same problem all the time. I had so many bonding straps under my truck that mechanics and oil change personnel would ask what they were for. I operated mainly on 40 and 80, and the engine/computer/fuel pump noise was very low. But, the tire noise was a big problem. For some reason, bias ply tires produced the most noise, and radials the least. There was always a difference being on the road, and the shoulder. On dirt roads, no problem at all. I tried graphite in the tires, but never thought to try it in the axle grease. bob baldwin WA5JOT bryan, texas |
#12
![]() |
|||
|
|||
![]()
On Nov 7, 8:34*am, Bob Baldwin wrote:
Mark wrote: WHEEL STATIC ONLY ON SOME PATCHES OF PAVEMENT? *WHY? With the financial mess, I have started to listen to AM radio in the car on the way to and from work for the past few weeks and I've noticed some random static at certain locations. *At first I attributed this to some power line noise. *Bit it didn't really sound like 60 Hz buzz hash, it was more random popcorn like but I know power lines can blow around in the wind and have strange discharges so I didn't think too much of it for a while. *But after a few days I noticed that the static is there only when the car is moving. * OK, so its wheel *static. Static electricity from the wheels or brakes or something. *OK that's not unusual either. * But it is the combination that has me curious. *This static only occurs when the car is moving and it only occurs at certain repeatable locations on my drive. Everyday when I turn the corner from X to Y, I get the static as the car is moving, but not when stopped at the same corner. * *And I never get the static when turning the corner from A to B. *If it was power line, stopping the car wouldn't stop the static. *If it is wheel static, why does it not happen all the time and happen only at certain locations. *It seems as if these certain locations have something special about the pavement or the water content of the soil or something. *None of that seems likely to me though, I see nothing changing in the pavement as I drive from an area of static to an area of non-static. * *It is not related to stepping on the brake or gas or shifting gears or going over bumps or any other aspect of the car that I can tell other than it's speed down the road. As an experiment, I attached a drag wire under the car. *The wire drags on the ground to discharge any static build up *the car. *This made no difference. * Another clue, we've had no rain here in a while. *The static all stops during wet weather. *Also I am in the Philadelphia area and the AM station is in the New York area so it is on the weak side. I've been a ham for over 30 years and I have a lot of experience with EMI, but this one has me scratching my head. *The *wheel static changes repeatably *in different locations for no apparent reason. It's got to be something to do with the pavement. *Anybody have any experience with this? Mark * I used to run HF mobile, and had this same problem all the time. I had so many bonding straps under my truck that mechanics and oil change personnel would ask what they were for. I operated mainly on 40 and 80, and the engine/computer/fuel pump noise was very low. But, the tire noise was a big problem. For some reason, bias ply tires produced the most noise, and radials the least. There was always a difference being on the road, and the shoulder. On dirt roads, no problem at all. I tried graphite in the tires, but never thought to try it in the axle grease. bob baldwin WA5JOT bryan, texas- Hide quoted text - - Show quoted text - A lot of time when you cross the state line the asphalt changes and you can hear the difference. I noticed a big difference as soon as I crossed into Ga from Fl the other day. Fl had the new asphalt that is suppose to give you more traction in the rain and Ga hadnt upgraded their's yet. I didnt realize the stactic was coming from the road/ tires until it turned off like someone threw a switch as soon as I crossed the line. Jimmie |
#13
![]() |
|||
|
|||
![]()
On Nov 7, 9:01*am, JIMMIE wrote:
On Nov 7, 8:34*am, Bob Baldwin wrote: Mark wrote: WHEEL STATIC ONLY ON SOME PATCHES OF PAVEMENT? *WHY? With the financial mess, I have started to listen to AM radio in the car on the way to and from work for the past few weeks and I've noticed some random static at certain locations. *At first I attributed this to some power line noise. *Bit it didn't really sound like 60 Hz buzz hash, it was more random popcorn like but I know power lines can blow around in the wind and have strange discharges so I didn't think too much of it for a while. *But after a few days I noticed that the static is there only when the car is moving. * OK, so its wheel *static. Static electricity from the wheels or brakes or something. *OK that's not unusual either. * But it is the combination that has me curious. *This static only occurs when the car is moving and it only occurs at certain repeatable locations on my drive. Everyday when I turn the corner from X to Y, I get the static as the car is moving, but not when stopped at the same corner. * *And I never get the static when turning the corner from A to B. *If it was power line, stopping the car wouldn't stop the static. *If it is wheel static, why does it not happen all the time and happen only at certain locations. *It seems as if these certain locations have something special about the pavement or the water content of the soil or something. *None of that seems likely to me though, I see nothing changing in the pavement as I drive from an area of static to an area of non-static. * *It is not related to stepping on the brake or gas or shifting gears or going over bumps or any other aspect of the car that I can tell other than it's speed down the road. As an experiment, I attached a drag wire under the car. *The wire drags on the ground to discharge any static build up *the car. *This made no difference. * Another clue, we've had no rain here in a while. *The static all stops during wet weather. *Also I am in the Philadelphia area and the AM station is in the New York area so it is on the weak side. I've been a ham for over 30 years and I have a lot of experience with EMI, but this one has me scratching my head. *The *wheel static changes repeatably *in different locations for no apparent reason. It's got to be something to do with the pavement. *Anybody have any experience with this? Mark * I used to run HF mobile, and had this same problem all the time. I had so many bonding straps under my truck that mechanics and oil change personnel would ask what they were for. I operated mainly on 40 and 80, and the engine/computer/fuel pump noise was very low. But, the tire noise was a big problem. For some reason, bias ply tires produced the most noise, and radials the least. There was always a difference being on the road, and the shoulder. On dirt roads, no problem at all. I tried graphite in the tires, but never thought to try it in the axle grease. bob baldwin WA5JOT bryan, texas- Hide quoted text - - Show quoted text - A lot of time when you cross the state line the asphalt changes and you can hear the difference. I noticed a big difference as soon as I crossed into Ga from Fl the other day. Fl had the new asphalt that is suppose to give you more traction in the rain and Ga hadnt upgraded their's yet. I didnt realize the stactic was coming from the road/ tires until it turned off like someone threw a switch as soon as I crossed the line. Jimmie If the road surface interface is not "keyed" to the moving part then statitic will always occur. If there is a contradiction in velocity of the two interfaced parts static will occur, if the two surfaces maintain the same velocity static will not occur. Thus static production depend purely on relative velocity which is governed by friction in your case. Art |
#14
![]() |
|||
|
|||
![]()
On Fri, 7 Nov 2008 13:17:06 -0800 (PST), Art Unwin
wrote: Some readers may be confused with the terminology of the original: If the road surface interface is not "keyed" to the moving part then Keyed: Scraping action alongside of a car for retribution. statitic will always occur. If there is a contradiction in velocity of the two interfaced parts static will occur, Contradiction: A failed interdiction. if the two surfaces maintain the same velocity static will not occur. Thus static production depend purely on relative velocity which is governed by friction in your case. Velocity: In southern Asia, larger than a town, smaller than a metropolis. Art Thus our original authur posits: if while driving around, the decaying hegemony of the counter-terrorists up and whisk you off to Ceylon for an interview - and you manage to scrape out of it (Keyed Contradiction), you will have escaped incarceration in the city of Velo (originally Veloceylon, that westerners have regrettably corrupted, as in the original here with Velocity) where static cling, the bane of haberdashers, is notable outside of the monsoon season. Haberdashers? Static cling? Yes, it is an exceptional reach in vocabulary to answer for noise from the pavement. Join us at rec.radio.amateur.antenna for further examples in this fascinating tour of creative expression. 73's Richard Clark, KB7QHC |
#15
![]() |
|||
|
|||
![]()
On Thu, 6 Nov 2008 02:24:48 -0500, Ed Cregger wrote:
"Tehrasha Darkon" wrote: On Wed, 5 Nov 2008, Mark wrote: I've been a ham for over 30 years and I have a lot of experience with EMI, but this one has me scratching my head. The wheel static changes repeatably in different locations for no apparent reason. It's got to be something to do with the pavement. Anybody have any experience with this? My guess is different lengths/types/orientation of rebar in the roadbed. Or electronic/magnetic sensors embedded in the road. I've been able to associate _hash_ , not *static* , to DOT-type roadside traffic informational signs -- usually the solar-assisted, battery operated style. My guess is they use some high-KHz power conversion and/or some not-so-well shielded electronics to operate the sign. The effect, though, is seen over a quarter mile, or less, section of the road. Jonesy -- Marvin L Jones | jonz | W3DHJ | linux 38.24N 104.55W | @ config.com | Jonesy | OS/2 * Killfiling google & XXXXbanter.com: jonz.net/ng.htm |
#16
![]() |
|||
|
|||
![]() "Mark" wrote in message ... WHEEL STATIC ONLY ON SOME PATCHES OF PAVEMENT? WHY? With the financial mess, I have started to listen to AM radio in the car on the way to and from work for the past few weeks and I've noticed some random static at certain locations. At first I attributed this to some power line noise. Bit it didn't really sound like 60 Hz buzz hash, it was more random popcorn like but I know power lines can blow around in the wind and have strange discharges so I didn't think too much of it for a while. But after a few days I noticed that the static is there only when the car is moving. OK, so its wheel static. Static electricity from the wheels or brakes or something. OK that's not unusual either. But it is the combination that has me curious. This static only occurs when the car is moving and it only occurs at certain repeatable locations on my drive. Everyday when I turn the corner from X to Y, I get the static as the car is moving, but not when stopped at the same corner. And I never get the static when turning the corner from A to B. If it was power line, stopping the car wouldn't stop the static. If it is wheel static, why does it not happen all the time and happen only at certain locations. It seems as if these certain locations have something special about the pavement or the water content of the soil or something. None of that seems likely to me though, I see nothing changing in the pavement as I drive from an area of static to an area of non-static. It is not related to stepping on the brake or gas or shifting gears or going over bumps or any other aspect of the car that I can tell other than it's speed down the road. As an experiment, I attached a drag wire under the car. The wire drags on the ground to discharge any static build up the car. This made no difference. Another clue, we've had no rain here in a while. The static all stops during wet weather. Also I am in the Philadelphia area and the AM station is in the New York area so it is on the weak side. I've been a ham for over 30 years and I have a lot of experience with EMI, but this one has me scratching my head. The wheel static changes repeatably in different locations for no apparent reason. It's got to be something to do with the pavement. Anybody have any experience with this? Mark Mark, I came across this article, it may help you. http://www.k0bg.com/static.html 73 HarryH |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Mr. Static - Index: The On-Line Resource for Static-Related Compliance Issues | Shortwave | |||
-------> WANTED - LAW ENFORCEMENT PATCHES <-------- | Antenna | |||
-------> WANTED - LAW ENFORCEMENT PATCHES <-------- | Shortwave | |||
-------> WANTED - LAW ENFORCEMENT PATCHES <-------- | Scanner | |||
W A N T E D: PATCHES MILITARY - POLICE - FIRE | Scanner |