| Home |
| Search |
| Today's Posts |
|
#4
November 8th 08, 01:52 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Aluminum to Copper interface
wrote:
If you are talking about home brew stuff, the general solution is to clean, apply anti-oxide grease, and connect under compression, i.e. something with a tightening screw. I'm putting my rotatable 20m dipole back up and am, once again, needing to connect ladder-line to aluminum tubing out in the weather. I guess I'll try brass hardware this time. -- 73, Cecil http://www.w5dxp.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mag Mount on aluminum ? | Antenna | |||
| Building a Solid Copper Ground Pipe {Tube} with an Solid Iron Core. - Also - Water Drilling a Solid Copper Pipe for a Ground Rod. | Shortwave | |||
| A copper | Shortwave | |||
| Copper antennas: | Antenna | |||
| Want Aluminum towers, etc | Antenna | |||
![Cecil Moore[_2_] is offline](https://www.radiobanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
