| Home |
| Search |
| Today's Posts |
|
#7
|
|||
|
|||
|
NoSPAM wrote:
... One suggestion I have is to look at cheap plastic coathangers. These are about 1/4 inch in diameter and are not vinyl coated wire hangers. Several insulators can be cut from a single coathanger. Since you can often buy these hangers for around $1.00 for ten, a few dollars could provide a good number of insulators. If you don't like the color, spray paint them with Krylon or another acrylic paint. White will provide the best ultraviolet resistance. I would limit my wire size to 16 Gauge or smaller as this plastic is quite brittle. 73, Dr. Barry L. Ornitz WA4VZQ Excellent, comprehensive, broad in scope, generally-good-advise, etc. Thanks for your time, regards, JS |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| [Fwd: FS wood lathe] | Policy | |||
| [Fwd: FS wood lathe] | CB | |||
| Looking for a National HRP-60 wood coil box | Boatanchors | |||
| FA:QST'S, plugs,spacers,parts.... | Boatanchors | |||