LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Old November 20th 08, 08:39 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 828
Default Shellac, varnish, parrafin wax for wood feedline spacers?

NoSPAM wrote:

One suggestion I have is to look at cheap plastic coathangers. These are
about 1/4 inch in diameter and are not vinyl coated wire hangers. Several
insulators can be cut from a single coathanger. Since you can often buy
these hangers for around $1.00 for ten, a few dollars could provide a good
number of insulators. If you don't like the color, spray paint them with
Krylon or another acrylic paint. White will provide the best ultraviolet
resistance. I would limit my wire size to 16 Gauge or smaller as this
plastic is quite brittle.



good post, Barry

The suggestion of plastic coat hangers is interesting. I think I might
try home brewing with some pink ones! 8^)


- 73 de Mike N3LI -
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Fwd: FS wood lathe] Fred Policy 2 July 2nd 06 06:04 PM
[Fwd: FS wood lathe] otis amps CB 0 June 18th 06 01:29 AM
Looking for a National HRP-60 wood coil box Mort Denison Boatanchors 1 March 24th 06 04:32 AM
FA:QST'S, plugs,spacers,parts.... Heytubeguy Boatanchors 0 April 14th 04 02:32 PM


All times are GMT +1. The time now is 12:10 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017