| Home |
| Search |
| Today's Posts |
|
#13
|
|||
|
|||
|
I bought a self-supporting 56' Heights tower with its clamshell
tilt-over-kit unit 8 feet up from the base. I lower the tower with a 3/8" power drill and never leave the ground for anything. IMHO, nested towers that leave the boom 22' feet in the air and the antenna elements 4-to-15 feet from your reach are overrated! -- -larry K8UT "MTV" wrote in message ... I'm starting to look for a 55' freestanding tower with house wall bracket. Am undecided on a lattice type or tubular. Being an old geezer I am not interested in the standard lattice type which requires climbing, but a nestable type to be raised and lowered by a crank or motor. I figure if it can be lowered I could work on it from the roof of my one story house. Main antenna would be a Cushcraft A4S 4-element or equivalent - wind area abt 4 sq ft. Not sure I could handle the huge X7 Big Thunder and its 7.9 sq ft., although that would be ideal. Any first hand experience or recommendations? Marv W5MTV |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Use of lattice line to feed dipole | Antenna | |||
| Lattice-wound RF choke replacement, 50 years later | Boatanchors | |||
| Lattice-wound RF choke replacement, 50 years later | Homebrew | |||
| Lattice-wound RF choke replacement, 50 years later | Homebrew | |||
| Is Universal Towers (auminum towers) Still in Business ? | Antenna | |||