Slick,

The only thing about making the 48 inch mast non resonant is what's on the
other end of it? A ceramic insulator is not the same as a Radio Shack steel
house bracket. Since it is behind the first reflector, probably doesn't
matter in the real world.

Tam/WB2TT
"Dr. Slick" wrote in message
om...
"Tam/WB2TT" wrote in message
...
If the second reflector is actually doing anything, which I doubt, you
should be using a non metallic mast, and not bringing the coax down
between
the reflectors.

Tam/WB2TT


Actually, if you believe the yagi optimizer program, the second
reflector is indeed not doing TOO much, but it does affect the back
shape of the pattern, and improves the impedance bit, and also
increases the dBd of the outer edge of the pattern by tiny bit too.

And i did simulate having the mast at 48 inches from the DE, which
i was advised was the distance where the mast would have the least
affect. Changing the mast length in the YO program does affect the
pattern shape though, so i tried to make the mast a non-resonant
length.

At any rate, we could probably survive without the second
reflector, you are most likely correct, but maybe for the next design.

It first, i considered having the "T" section of PVC pipe move
outwards at a 90 degree angle, and then attach another section of 2"
PVC that would be sticking out, so that the coax would be totally
perpendicular to all the elements. But, this would be a bit unwieldy.



Slick

"Tam/WB2TT" wrote in message ...
Slick,

The only thing about making the 48 inch mast non resonant is what's on the
other end of it? A ceramic insulator is not the same as a Radio Shack steel
house bracket. Since it is behind the first reflector, probably doesn't
matter in the real world.


Tam,

The 48 inches refers to it's position relative to the DE, not it's
actually length, which in the ideal case would be at a non-resonant
length. The yagi optimizer program i have shows that the length does
indeed affect the propagation pattern.

I'm not certain how the user has the mast mounted, but it's
somewhere around 7.5 feet or so in length.

At any rate, he is getting out very well!

Err...i won't say at what wattage, someone might faint out there!

hahaha!


Slick

where is the center of radiation on this antenna ?
where will the strongest field strength be ?