| Home |
| Search |
| Today's Posts |
|
#12
February 1st 09, 04:45 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Bend the whip on a magmount?
Ken,
If you consider how much movement that there is in a whip in a mobile situation, the 20 deg will not make much difference to it, I bent mine a fraction more, and it made little difference to the VSWR or the performance. John VK2KC "Chevy454" wrote in message ... I want to put my 2M 5/8-wave mag-mount on the trunk lid, which slopes down at 20 degrees. I am concerned that most of my signal is going into the ground or outer space. Can I bend the long whip so it stands vertically? Should I do it? does the downward slope of the ground plane leave a problem unaddressed? Ken KC2JDY |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Capacitive coupling of magmount | Antenna | |||
| Bend in xmission line | Antenna | |||
| Dave ahs gone round the bend no religion that does not follow chrsitian teaching is allowed | Policy | |||
| Drill vs. MagMount ?? | Antenna | |||
| FS:NMO 5' MAGMOUNT WITH COAX | Swap | |||
Threaded Mode
