Super Antenna thumbscrew
 

My Super Antenna MP-1 blew over today, and the plastic thumbscrew broke
off. Does anyone know where I might find such a part? I've written to
the guy who makes them, but I've tried that before when other parts have
broken, and he doesn't respond. Any help would be appreciated.

Super Antenna thumbscrew
 

On Sun, 10 May 2009 14:18:10 -0400, Al Fansome
wrote:

My Super Antenna MP-1 blew over today, and the plastic thumbscrew broke
off. Does anyone know where I might find such a part? I've written to
the guy who makes them, but I've tried that before when other parts have
broken, and he doesn't respond. Any help would be appreciated.

http://www.superantennas.com
If he doesn't answer his snail mail, try the phone:
916-434-9936
Hint: You might have problems getting anyone's attention just prior
to the Dayton Hamvention (May 15-17)

I don't have an MP-1, but if you measure what's left of the nylon
locking screw, and determine the thread type, you should be able to
find something suitable at your local hardware store. If not, there
are plenty of nylon hardware vendors online. However, buying just one
screw might be rather expensive. Worst case is to buy a solid plastic
rod of the proper diameter, and use a threaded die to thread a
replacement screw. Use a radio knob for the handle.


--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Super Antenna thumbscrew
 

On May 10, 2:18*pm, Al Fansome wrote:
My Super Antenna MP-1 blew over today, and the plastic thumbscrew broke
off. Does anyone know where I might find such a part? I've written to
the guy who makes them, but I've tried that before when other parts have
broken, and he doesn't respond. Any help would be appreciated.

http://www.mcmaster.com/#plastic-thumb-screws

Tim.