| Home |
| Search |
| Today's Posts |
|
#15
June 4th 09, 06:06 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Using Tuner to Determine Line Input Impedance
On Thu, 4 Jun 2009 09:19:42 -0700 (PDT), dykesc
wrote: That is the type of calculator I am looking for. However, this one requires both source and load impedance as input. I am looking for one that will allow you to specify the source impedance (50+j0), fill in the capacitor and inductor values, and then tell you what the matched load side impedance is. The source code is at: http://www.hoflink.com/~mkozma/match19cb.html which, if you can follow the design and make your own changes, should be ammenable to your needs. 73's Richard Clark, KB7QHC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| LS-3 speaker input impedance | Boatanchors | |||
| Antenna Input Impedance | Antenna | |||
| [OT] Rcvr antenna input impedance | Antenna | |||
| NEW PROGRAM - Input Impedance & SWR of Resonant Antenna. | Antenna | |||
| Sony input impedance | Shortwave | |||
Threaded Mode
