| Home |
| Search |
| Today's Posts |
|
#8
June 21st 09, 08:06 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
using a microwave tester to measuer WiFi EIRP
On Sun, 21 Jun 2009 06:19:03 +0000 (UTC), "Geoffrey S. Mendelson"
wrote: What I need is to be able to place a device at a specific distance from a 2.4 gHz antenna and read the EIRP. Take a leadless 366 Ohm resistor, and coat it with temperature sensitive dichroic. 73's Richard Clark, KB7QHC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Low Cost USB RF & Microwave CW Power Meters. Come see us at the European Microwave Exhibition in Manchester, UK | Equipment | |||
| FA: Heathkit CT-1 Capaci-tester capacitance tester | Swap | |||
| WIFI | Equipment | |||
| WIFI | Equipment | |||
| My attempt to explain EIRP, or why EIRP should not be confused with transmitter power... | Shortwave | |||
Threaded Mode
