Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
Ralph Mowery wrote:
"'Doc" wrote in message ... Just from what you've posted, your tower sounds sort of 'marginal' to start with. I would be very careful in loosening any of those guys. - 'Doc Unless I missed something when I described the tower, what is marginal ? The first section of tower is set in a yard of cement as described in the Rohn booklet. Also they only require two sets of guy wires up to 70 feet. I live in the middle of North Carolina so a large build up of ice or very high winds ( say over 90 mph) would be unusual. On the "internets", there is always someone for whom your tower setup is not acceptable. Doesn't matter how well made and installed, there's something wrong with it, and it will come crashing down, causing you great liability problems. Anyhow, being that the tower and guys are part of a system, I'd either have the loppers take the tree down in stages with sections roped down, or install temporary guys. Th/e first method is much easier and cheaper. - 73 d eMike N3LI - |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
removing enamel | Homebrew | |||
REMOVING ENAMEL COATING | Homebrew | |||
Removing PRO III Main tuning knob? | Equipment | |||
Need Help on Removing Viking 500 Front Panel | Boatanchors | |||
removing spanner nut | Scanner |