Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1 "Tam" == t-tammaru Tam writes: Tam Jack, For what its worth, I ran EZNEC on a 40m dipole at 17 Tam feet. I think you said yours was less than 20 feet up. For a flat Tam top dipole, I got a resonant impedance of 23 Ohms. When I dropped Tam the ends 15 degrees, the impedance dropped to 17 Ohms. Sort of in Tam line with what you are getting. Also, with multiple dipoles the Tam impedance will be less, because you can not completely ignore the Tam other radiators. Maximum gain was in the straight up direction. Tam Gain was about 6db down at 25 degrees elevation. On 15 meters, Tam you have 4 lobes offset about 45 degrees from Tam ends/broadside. Gain was about 3db down at 30 degrees elevation. That doesn't look so bad at all. Tam Why don't you post your complete configuration. Height at Tam feedpoint, and length and end point height for the three Tam radiators. Over the next couple of days, I'll take some careful measurements of the antenna, its supports, and the distance of everything from the back of the house. The house was built in the 1940s and was constructed with wood and concrete with a stucco finish. Jack. - -- Jack Twilley jmt at twilley dot org http colon slash slash www dot twilley dot org slash tilde jmt slash -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQFAX4+LGPFSfAB/ezgRAtjlAJ4wxt16eFbsHlxu+C7OvsfHqoX4MwCg+UEd NkhKArjbg1fF1h2YeURz7Sc= =bKgV -----END PGP SIGNATURE----- |
#2
|
|||
|
|||
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1 "Jack" == Jack Twilley writes: Jack Over the next couple of days, I'll take some careful Jack measurements of the antenna, its supports, and the distance of Jack everything from the back of the house. The house was built in Jack the 1940s and was constructed with wood and concrete with a Jack stucco finish. http://www.twilley.org/~jmt/antenna/dipole.html The only thing I'm missing because I didn't think to measure it was how long the individual dipole legs are. However, they started off as the normal lengths for a full-length 40m dipole and inverted vees for 20m and 10m, as mentioned in the page. Tomorrow I'll go out and measure the wires and update the text and the relevant drawing with that information. Tam, if you do model this antenna, I'd really appreciate it if you shared the model with me as I've always wanted to learn more about nec4 and friends but never really had the ability to get past the punch-card mindset of the input files, and having my own antenna modeled would probably do it. Jack. - -- Jack Twilley jmt at twilley dot org http colon slash slash www dot twilley dot org slash tilde jmt slash -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQFAYSmrGPFSfAB/ezgRArsoAKDwJjajxoQ8flxBLEZvJX7k8WgXpgCgtMZl o4pYEPDM06R9qsu00CQPo40= =TUkE -----END PGP SIGNATURE----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
EH Antenna Revisited | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |