LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Report Post  
Old March 23rd 04, 11:19 PM
Roy Lewallen
 
Posts: n/a
Default

Jack Twilley wrote:

. . .
Frequency Resistance Reactance Impedance
7.00 14 6 15.2
7.05 18 15 23.4
7.10 18 21 27.7
7.15 21 20 29.0
7.20 24 27 36.1
7.25 28 36 45.6
7.30 28 43 51.3

. . .


The impedance is well within a 2:1 match throughout the voice segment,
and a 3:1 match across the entire band.


Assuming a 50 ohm system, the SWR for each of your impedances is shown
in the SWR column below. You might want to review how SWR is calculated
-- the ARRL Antenna Book is a good source.

Frequency Resistance Reactance Impedance SWR
7.00 14 6 15.2 3.63
7.05 18 15 23.4 3.06
7.10 18 21 27.7 3.33
7.15 21 20 29.0 2.83
7.20 24 27 36.1 2.82
7.25 28 36 45.6 2.93
7.30 28 43 51.3 3.37

Roy Lewallen, W7EL
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Mobile Ant L match ? Henry Kolesnik Antenna 14 January 20th 04 04:08 AM
EH Antenna Revisited Walter Maxwell Antenna 47 January 16th 04 04:34 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 06:27 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017