LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old September 20th 09, 09:43 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2008
Posts: 173
Default Resaonance and minimum SWR


"Roy Lewallen" wrote in message
...
Antonio Vernucci wrote:
. . .
Under the assumption that dielectric loss is negligible, a permittivity
2.26 time higher than that of air results in a lower inner conductor
diameter, for a given outer diameter cable and a given impedance. . .


Yes, and this is why foamed dielectric cable has lower loss than solid
dielectric cable. Not because of lower dielectric loss (at least below a
few GHz), but because it has a larger center conductor for the same
impedance and outside diameter.

Roy Lewallen, W7EL



You've got it ... spread the word to all those amateurs who are hung up on
(negligible) dielectric loss!

Chris


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Minimum gauge for groud... Dave[_15_] Shortwave 2 April 16th 08 03:33 PM
Minimum gauge for groud... msg Shortwave 0 April 15th 08 03:16 PM
75 to 50 ohm minimum loss pad J M Noeding Homebrew 6 February 2nd 05 08:16 AM
Solar Minimum in 2006? Mike Terry Shortwave 0 October 23rd 04 01:33 PM
FA: Swan 350 $15 minimum bid! mike Boatanchors 0 August 27th 03 11:12 PM


All times are GMT +1. The time now is 12:37 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017