"Wimpie" ha scritto nel messaggio
...
Did you also check the
legal aspects?

I think is the last problem for those guys
http://www.harriku.com/photos2008/radio98_1.jpg and more on
http://kotisivu.dnainternet.net/harriku/greeks.htm


Best regards,
Wim
PA3DJS

Regards,
-.-. --.-

my match Pi system http://www.tzitzikas.webs.com/match.JPG is ok or i must modificate this to LC match system? it is ok or i must remove the 1500pf capacitor and increase the the first capacitor and add constant capacitors to 500pf capacitor? thank you.

"tzitzikas" wrote in message
...

my match Pi system http://www.tzitzikas.webs.com/match.JPG is ok or i
must modificate this to LC match system? it is ok or i must remove the
1500pf capacitor and increase the the first capacitor and add constant
capacitors to 500pf capacitor? thank you.

--
tzitzikas


You probably need to answer the questions you were asked before anyone could
advise on matching, like what's the length of the antenna?

Also, is this for pirate radio?

Chris

In message , christofire
writes

"tzitzikas" wrote in message
...

my match Pi system http://www.tzitzikas.webs.com/match.JPG is ok or i
must modificate this to LC match system? it is ok or i must remove the
1500pf capacitor and increase the the first capacitor and add constant
capacitors to 500pf capacitor? thank you.

--
tzitzikas


You probably need to answer the questions you were asked before anyone could
advise on matching, like what's the length of the antenna?

Also, is this for pirate radio?

For 'educational purposes only', you could try these two programs. One
calculates the impedance at the feed-point of an inverted-L end-fed
antenna, and the other calculates the values of the L and C which you
need for an L-match tuner circuit.

endfeed.exe
l_tuner.exe (that's L-TUNER-EXE)

These - and many more wonderful programs - are available from this
website:
http://www.zerobeat.net/G4FGQ/
http://www.zerobeat.net/G4FGQ/page3.html#S301"

--
Ian