Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Separation required between side mount Jpole and Metal Tower
I am trying to find out how far an open stub, dual band, two meter and
seventy centimeter J-pole needs to be from a parallel metal support mast on which it is side mounted to avoid detuning the antenna. I'm not concerned about the effect on the radiation pattern as I can mount the antenna on the side of the mast towards the area I'm trying to cover. I have to build brackets to accomplish this mounting and I would like to avoid building multiple sets of them just to test for clearance. If anyone has the requisite skills and tools I would appreciate any information that can be readily found by modeling this antenna in proximity to a metal support mast consisting of four inch aluminum tube. I have two AB-952 masts on which to mount six antennas. Three of them will be two meter omnidirectional antennas. Since we need two limit interaction and interference between the three two meter stations We will be mounting one of these at the top of one mast, one a third of the way up the second mast, and the third two thirds of the way up the first mast. Both masts will be deployed with extension kits so they will be fifty feet in total height. In truth I just do not have the skills or the time to develop them to do this so any help would be greatly appreciated. This is for a public service event that is now only two weeks away. -- Tom Horne, W3TDH |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Spacing side-mounted VHF / UHF verticals away from tower | Antenna | |||
FS Fixed Price: SuperAntennas Side mount bracket for FT-817/ND 3/8 24 | Equipment | |||
WTB: side mount stand-offs for Rohn 25g tower | Swap | |||
AOR 7030 reviewed side by side with Drake R8A/B | Shortwave | |||
F.S. ICOM IC-706 With Mobile mount and separation kit | Swap |