Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() How far from the tower should I space a side-mounted 2M/440 gain vertical such as the Diamond X-510MA? I am considering mounting one vertical on top and two more on the sides, with the tops of the side-mounted verticals approximately even with or a bit below the base of the top-mounted one, all on a 50-foot Rohn 25G tower guyed at 30 feet. |
#2
![]() |
|||
|
|||
![]()
How far from the tower should I space a side-mounted 2M/440 gain vertical
such as the Diamond X-510MA? I am considering mounting one vertical on top and two more on the sides, with the tops of the side-mounted verticals approximately even with or a bit below the base of the top-mounted one, all on a 50-foot Rohn 25G tower guyed at 30 feet. You might want to take a look at the page at http://www.telewave.com/pdf/TWDS-7057.pdf which is part of Telewave's antenna catalog. It shows the effect on the pattern of Telewave's exposed-dipole antenna patterns, of adjusting the side-mounting distance from 1/4 wavelength to 1/2 wavelength. -- Dave Platt AE6EO Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior I do _not_ wish to receive unsolicited commercial email, and I will boycott any company which has the gall to send me such ads! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
TRAILER MOUNTED TOWER WANTED | Equipment | |||
WTB: side mount stand-offs for Rohn 25g tower | Swap | |||
AOR 7030 reviewed side by side with Drake R8A/B | Shortwave | |||
Drake R8B side by side with an Icom 756 PRO III | Shortwave | |||
Actual side by side comparison | Shortwave |