LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old March 23rd 10, 05:53 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Dec 2007
Posts: 133
Default Measuring antenna loss: Heat balance?

Hi Jim,

Thanks for the thoughts; I hadn't thought of many of the additional loss
mechanisms you mention.

"Jim Lux" wrote in message
...
In the subject case here, think of this: say you had a 2cm diameter copper
bar and you run 100 Amps of DC through it. The current is distributed
evenly, as is the power dissipation. Now run 1 MHz RF through that same bar.
The skin depth is about .065 mm, so virtually ALL the RF current is
contained within a layer less than 1/3 mm thick. That's a very different
heat and thermal distribution (sort of like the difference between putting
that thick steak in the 200F oven and throwing it on the blazing hot grill).


If you're just looking at surface temperature (i.e., with a thermal camera),
will it take more or power at 1MHz to obtain a given surface temperature
increase than at DC?

At DC, since you're heating up the entire bar, and the only way for the heat
to go is up "out" to the surface... I'm thinking... less power is needed for a
given rise?

That would certainly then overestimate antenna efficiency.

---Joel

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Measuring loss of vertical antenna roof counterpoise? TF3KX Antenna 2 August 13th 09 09:26 PM
G5RV antenna feed line balance. cliff wright Antenna 4 February 3rd 08 04:11 AM
measuring cable loss Jimmie D Antenna 51 August 15th 07 02:40 AM
Measuring Antenna Efficiency Wayne Antenna 53 April 29th 07 06:30 PM
Measuring small inductances using a return loss bridge aWn Homebrew 11 September 11th 03 03:17 AM


All times are GMT +1. The time now is 12:32 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017