'Doc wrote:

Zeno,
"Swarming" means that because of the 'memory' of the wire
used to make the 'twin lead', when it's turned loose from
whatever you fixed it to to build it, it tries to assume it's
former shape. Usually results in a 'rat's nest' of wire in
a not so compact ball, LOL! Not really something to waste a
lot of worry on, just be aware that it can happen.
'Doc

Perhaps the term 'Sproinging' might be better. You take it out in a
neat roll, let go, it goes 'Sproing!' and you have a rats nest. When
you get ready to put it up, call a couple of chums over for an
antenna raising party and let them loose the coil -- then let them clean
up the ball of wire! :-)

Irv VE6BP


--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/
Visit my very special website at http://members.shaw.ca/finkirv4/
Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada