LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old April 21st 04, 06:40 AM
zeno
 
Posts: n/a
Default






Hi Richard,

You remind me that I do not understand something. Let's say the
characteristic impedance of this 540' loop is in the neighborhood of 140
ohms in free space, or even as you say closer to even 35 ohms in reality.
Your point was, if I understand correctly, that this is in the ballpark
of 50ohm coax and you suggest it can just as easily be fed into the coax.

But I thought that coax is unbalanced and the point was to go with a
balanced feed line?


I guess I am not understanding the relevant differences between balanced
vs. unbalanced feedlines, and getting the impedance of the the
transmission line close to the impedance of the antenna.

I thought the point of my striving to use balanced ladder line was to
somehow gain something that would be compromised by using coax. I thought
that the the ladder line which might be 488 ohms say is still going to be
a better feedline than using the 50ohm coax. The coax would still then
require a balun, correct? (a 1:1 banlun?).


It is sites like this: http://www.cebik.com/par.html that tend to get
one thinking about this whole diy approach.

My reading and gleaning of websites has me of the opinion (at this point)
that the balanced line with this long loop is better (multi band) than to
feed it with coax.

I believe Cecil has already explained this in terms of the wide range of
actual resistance that may be encountered multi band. (hey, I am just now
learning to talk this lingo....just barely know what I am talking
about....operating intuitively, and with the kindness of strangers.......



Zeno (aka Bill) KG6UHM for the moment.....



Richard Clark wrote:

On Tue, 20 Apr 2004 06:23:13 GMT, zeno wrote:

Any recommendations on a specific type of commercially made window
(ladder) line? I see that it comes in a variety of configurations
and slight differences in Z.

This feed line will be for a full wave 160m loop.


Hi Bill,

You repeatedly characterize this as 160M and given the size and height
- Why do you think you need ladder line when it will in all
probability fit quite nicely into a coax?

In free space, it may show as much as 140 Ohms R; however, within the
cold embrace of earth only 50 feet away, you will barely muster 35
Ohms at resonance.

73's
Richard Clark, KB7QHC


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Methods for ladder line feed on rotatable antenna? KS7J Antenna 11 November 18th 03 01:45 AM
100 w, Automatic Ladder line HF tuner Tom - KS5x Antenna 2 November 11th 03 02:09 PM
Ladder Line or Coax For Reception only? Walter Antenna 12 October 11th 03 03:16 AM
Ladder line questions mike Antenna 1 September 22nd 03 05:24 AM
Complex line Z0: A numerical example Roy Lewallen Antenna 11 September 13th 03 01:04 AM


All times are GMT +1. The time now is 01:02 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017