Need source 1:1 unun N Connectors
I need a one to one un-un to isolate common mode currents on a feed
line that is fitted with N connectors. The power level is 100 Watts or less. Just for the sake of having some margin a two hundred watt design would be good. -- Tom Horne, W3TDH |
Need source 1:1 unun N Connectors
On 5/8/2010 12:51 PM, Tom Horne wrote:
I need a one to one un-un to isolate common mode currents on a feed line that is fitted with N connectors. The power level is 100 Watts or less. Just for the sake of having some margin a two hundred watt design would be good. -- Tom Horne, W3TDH The frequency range that it is expected to handle would help a lot. And the connector type is meaningless. tom K0TAR |
Need source 1:1 unun N Connectors
On 5/8/2010 8:25 PM, tom wrote:
The frequency range that it is expected to handle would help a lot. And the connector type is meaningless. tom K0TAR Ok, Mostly Meaningless. (Sorry Mr Adams) tom K0TAR |
All times are GMT +1. The time now is 04:45 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com