Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need source 1:1 unun N Connectors
I need a one to one un-un to isolate common mode currents on a feed
line that is fitted with N connectors. The power level is 100 Watts or less. Just for the sake of having some margin a two hundred watt design would be good. -- Tom Horne, W3TDH |
#2
|
|||
|
|||
Need source 1:1 unun N Connectors
On 5/8/2010 12:51 PM, Tom Horne wrote:
I need a one to one un-un to isolate common mode currents on a feed line that is fitted with N connectors. The power level is 100 Watts or less. Just for the sake of having some margin a two hundred watt design would be good. -- Tom Horne, W3TDH The frequency range that it is expected to handle would help a lot. And the connector type is meaningless. tom K0TAR |
#3
|
|||
|
|||
Need source 1:1 unun N Connectors
On 5/8/2010 8:25 PM, tom wrote:
The frequency range that it is expected to handle would help a lot. And the connector type is meaningless. tom K0TAR Ok, Mostly Meaningless. (Sorry Mr Adams) tom K0TAR |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Balun vs. Unun | Shortwave | |||
Balun/Unun help please. | Antenna | |||
Source for Yaesu Power Cable Connectors? | Equipment | |||
Source for Yaesu Power Cable Connectors? | Equipment | |||
9:1 unun question | Shortwave |