Who makes this HF Beam ??
 

Hello to All
Yesterday I took down a small HF beam antenna,for lady whose husband just
passed away.
He had bought it last year brand new.At 1st I thought it was a Butternut
Butterfly beam,but its not.
The reflector is a elongated triangle with wire around the perimeter of it
and has clear tubes for support of the triangle that go into Aluminum tubes
of the support structure,in the middle of the triangle is a plastic hub that
it all ties into and mounts to the boom.The boom look like aprox 10'
long,the driven element has a matching network of some kind that is in a
gray 4x4 box,and at each end of the driven element it has a hub with about 8
rods on it,the director is almost the same as the driven but is not split in
middle and has the same hub and rods at the ends of it as the driven
element.
I hope I explained ok the best that I could do
Any input would be great
Thanks all and have a nice summer
Howard
VE4ISP

Who makes this HF Beam ??
 

Just found something
Maybe a TGM commincations Model MQ-36SR
Howard

"Howard Kowall" wrote in message
...
Hello to All
Yesterday I took down a small HF beam antenna,for lady whose husband just
passed away.
He had bought it last year brand new.At 1st I thought it was a Butternut
Butterfly beam,but its not.
The reflector is a elongated triangle with wire around the perimeter of it
and has clear tubes for support of the triangle that go into Aluminum
tubes of the support structure,in the middle of the triangle is a plastic
hub that it all ties into and mounts to the boom.The boom look like aprox
10' long,the driven element has a matching network of some kind that is in
a gray 4x4 box,and at each end of the driven element it has a hub with
about 8 rods on it,the director is almost the same as the driven but is
not split in middle and has the same hub and rods at the ends of it as
the driven element.
I hope I explained ok the best that I could do
Any input would be great
Thanks all and have a nice summer
Howard
VE4ISP

Who makes this HF Beam ??
 

Howard,
Here is a link, http://www.atrc.com.au/mq36sr.htm
does it look like this one?
John VK2KC

"Howard Kowall" wrote in message
...
Hello to All
Yesterday I took down a small HF beam antenna,for lady whose husband just
passed away.
He had bought it last year brand new.At 1st I thought it was a Butternut
Butterfly beam,but its not.
The reflector is a elongated triangle with wire around the perimeter of it
and has clear tubes for support of the triangle that go into Aluminum
tubes of the support structure,in the middle of the triangle is a plastic
hub that it all ties into and mounts to the boom.The boom look like aprox
10' long,the driven element has a matching network of some kind that is in
a gray 4x4 box,and at each end of the driven element it has a hub with
about 8 rods on it,the director is almost the same as the driven but is
not split in middle and has the same hub and rods at the ends of it as
the driven element.
I hope I explained ok the best that I could do
Any input would be great
Thanks all and have a nice summer
Howard
VE4ISP

Who makes this HF Beam ??
 

Yes I did finally find it
I also manage to download the manuals aslo
thanks very much John for you time and effort
Howard VE4ISP
"VK2KC" wrote in message
...
Howard,
Here is a link, http://www.atrc.com.au/mq36sr.htm
does it look like this one?
John VK2KC

"Howard Kowall" wrote in message
...
Hello to All
Yesterday I took down a small HF beam antenna,for lady whose husband just
passed away.
He had bought it last year brand new.At 1st I thought it was a Butternut
Butterfly beam,but its not.
The reflector is a elongated triangle with wire around the perimeter of
it and has clear tubes for support of the triangle that go into Aluminum
tubes of the support structure,in the middle of the triangle is a plastic
hub that it all ties into and mounts to the boom.The boom look like aprox
10' long,the driven element has a matching network of some kind that is
in a gray 4x4 box,and at each end of the driven element it has a hub with
about 8 rods on it,the director is almost the same as the driven but is
not split in middle and has the same hub and rods at the ends of it as
the driven element.
I hope I explained ok the best that I could do
Any input would be great
Thanks all and have a nice summer
Howard
VE4ISP

Who makes this HF Beam ??
 

Hi I wonder if anyone can help I have Baugh one of the TMG beams the model 36 three element version but I can not find a manual any ware .
If anyone has one or can point me in the right direction I would be great full ?.
I have put it up and only tryed an analyser on it but the vswr is sky high.
I hope the baling is ok?.
Regards DAVY ( GI4XIR ) email 73's