Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 24th 10, 09:56 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Apr 2010
Posts: 484
Default Galvanized or Copper Gound Rods?

On Jun 24, 7:53*am, "Szczepan Bialek" wrote:
"K1TTT" ...
On Jun 23, 8:12 am, "Szczepan Bialek" wrote:



Is it possible to measure the netto current in the track
ground-antenna?
sure.


" Transmitters for long and medium wave require good grounding and soil
of
high electrical conductivity. Locations at the sea or in river valleys
are
ideal, but the flood danger must be considered. Transmitters for UHF are
best on high mountains to improve the range ".


no they don't... those types of transmitters work just fine in


airplanes with no soil available.

In the airplanes is the "chassis ground". The large metal surface is the
charge source. The surface exchanges charges with the air.


not nearly large enough, nor necessary.


. Static electrical charge can build up to high
values, even at times of no thunderstorm activity, when such tall
structures
are insulated from ground."


Would be interesting to know the value of the DC current.


Do you agree that it is the field emission (loss of electrons)?

loss of electrons maybe, but due to friction with particulates in the


atmosphere. *also partly due to the fair weather electric field:http://www.missioninstruments.com/pa...ec_fields.html

In a short period of time the atmospheric conditions are similar.

I am asking for *measurement of the netto current in the track
ground-antenna.
The two measurements: before and during transmitting in the same atmospheric
conditions.
S*


net current = 0.

  #2   Report Post  
Old June 25th 10, 01:25 AM posted to rec.radio.amateur.antenna
tom tom is offline
external usenet poster
 
First recorded activity by RadioBanter: May 2009
Posts: 660
Default Galvanized or Copper Gound Rods?

On 6/24/2010 3:56 PM, K1TTT wrote:
On Jun 24, 7:53 am, "Szczepan wrote:
Do you agree that it is the field emission (loss of electrons)?
loss of electrons maybe, but due to friction with particulates in the


atmosphere. also partly due to the fair weather electric field:http://www.missioninstruments.com/pa...ec_fields.html

In a short period of time the atmospheric conditions are similar.

I am asking for measurement of the netto current in the track
ground-antenna.
The two measurements: before and during transmitting in the same atmospheric
conditions.
S*


net current = 0.


He has yet to wonder how satellites could transmit very long. After
all, there would come a point in time where the charge would be so high
on the vacuum insulated satellite that it could perform his field
emission any longer.

It should be easy to observe as the signal strength would decrease with
time. I haven't noticed that effect myself, nor has anyone else.

tom
K0TAR

  #3   Report Post  
Old June 25th 10, 01:39 AM posted to rec.radio.amateur.antenna
tom tom is offline
external usenet poster
 
First recorded activity by RadioBanter: May 2009
Posts: 660
Default Galvanized or Copper Gound Rods?

On 6/24/2010 7:25 PM, tom wrote:
On 6/24/2010 3:56 PM, K1TTT wrote:
On Jun 24, 7:53 am, "Szczepan wrote:
Do you agree that it is the field emission (loss of electrons)?
loss of electrons maybe, but due to friction with particulates in the

atmosphere. also partly due to the fair weather electric
field:http://www.missioninstruments.com/pa...ec_fields.html

In a short period of time the atmospheric conditions are similar.

I am asking for measurement of the netto current in the track
ground-antenna.
The two measurements: before and during transmitting in the same
atmospheric
conditions.
S*


net current = 0.


He has yet to wonder how satellites could transmit very long. After all,
there would come a point in time where the charge would be so high on
the vacuum insulated satellite that it could perform his field emission


Oops should read "could NOT perform".

tom
K0TAR


  #4   Report Post  
Old June 25th 10, 08:44 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2009
Posts: 707
Default Galvanized or Copper Gound Rods?


"tom" wrote
. net...
On 6/24/2010 3:56 PM, K1TTT wrote:
On Jun 24, 7:53 am, "Szczepan wrote:

I am asking for measurement of the netto current in the track
ground-antenna.
The two measurements: before and during transmitting in the same
atmospheric
conditions.
S*


net current = 0.


He has yet to wonder how satellites could transmit very long. After all,
there would come a point in time where the charge would be so high on the
vacuum insulated satellite


"The use of the term ground (or earth) is so common in electrical and
electronics applications that circuits in portable electronic devices such
as cell phones and media players as well as circuits in vehicles such as
ships, aircraft, and spacecraft may be spoken of as having a "ground"
connection without any actual connection to the Earth. This is usually a
large conductor attached to one side of the power supply (such as the
"ground plane" on a printed circuit board) which serves as the common return
path for current from many different components in the circuit."

that it could perform his field emission any longer.


In the vacuum is the rare plasma. The are free charges.

It should be easy to observe as the signal strength would decrease with
time. I haven't noticed that effect myself, nor has anyone else.


Are you sure?
Each ground must be large enough. Engineers know what to do.
Sometimes they water the ground area.

In the space the chassis must be large enough.
S*


  #5   Report Post  
Old June 26th 10, 02:48 AM posted to rec.radio.amateur.antenna
tom tom is offline
external usenet poster
 
First recorded activity by RadioBanter: May 2009
Posts: 660
Default Galvanized or Copper Gound Rods?

On 6/25/2010 2:44 AM, Szczepan Bialek wrote:

"The use of the term ground (or earth) is so common in electrical and
electronics applications that circuits in portable electronic devices such
as cell phones and media players as well as circuits in vehicles such as
ships, aircraft, and spacecraft may be spoken of as having a "ground"
connection without any actual connection to the Earth. This is usually a
large conductor attached to one side of the power supply (such as the
"ground plane" on a printed circuit board) which serves as the common return
path for current from many different components in the circuit."

that it could perform his field emission any longer.


In the vacuum is the rare plasma. The are free charges.

It should be easy to observe as the signal strength would decrease with
time. I haven't noticed that effect myself, nor has anyone else.


Are you sure?
Each ground must be large enough. Engineers know what to do.
Sometimes they water the ground area.

In the space the chassis must be large enough.
S*



You know, he is sort of more amusing than Art. At first. Art can argue
and Art makes no sense, and neither does Szechuan, but he can't build an
argument that even sounds a little bit logical. And his arguments never
change. Art makes up new stuff all the time.

Prediction - Szechuan will eventually become so boring no one that no
one will respond.

tom
K0TAR


  #6   Report Post  
Old June 26th 10, 08:46 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2009
Posts: 707
Default Galvanized or Copper Gound Rods?


"tom" wrote
. net...
On 6/25/2010 2:44 AM, Szczepan Bialek wrote:


Prediction - Szechuan will eventually become so boring no one that no one
will respond.


Each one of you can measure the DC ground current.
Why you are so boring sending the same incontructive answer (no emission).
Emission is a fact. It is interesting how it is much.
S*


  #7   Report Post  
Old June 26th 10, 12:49 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Apr 2010
Posts: 484
Default Galvanized or Copper Gound Rods?

On Jun 26, 7:46*am, "Szczepan Bialek" wrote:
*"tom" ouse.net...

On 6/25/2010 2:44 AM, Szczepan Bialek wrote:


Prediction - Szechuan will eventually become so boring no one that no one
will respond.


Each one of you can measure the DC ground current.
Why you *are so boring sending the same incontructive answer (no emission).
Emission is a fact. It is interesting how it is much.
S*


first, the fcc would get really mad at me if my rf waves weren't
symmetric, that would make for horribly distorted signals!

and yes, i have measured the dc ground current and it is also zero.
when you have a transmitter in your car are the rubber tires not
isolating the car body from ground? do you get shocked after you have
been transmitting for a while and step out of your car? where does
the ground current go when you have a plastic cased handheld radio?

i agree, mr. b is not as much fun as art... at least he made up things
that weren't so easy to observe as wrong, after all who could see the
waste deep levitating neutrinos jumping off their diamagnetic
antennas. mr. b's stuff is just absurd.
  #8   Report Post  
Old June 26th 10, 07:21 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2009
Posts: 707
Default Galvanized or Copper Gound Rods?


"K1TTT" wrote
...
On Jun 26, 7:46 am, "Szczepan Bialek" wrote:

Emission is a fact. It is interesting how it is much.


first, the fcc would get really mad at me if my rf waves weren't

symmetric, that would make for horribly distorted signals!

Each waves transports mass in direction from the source. This is form of
asymmetry.

and yes, i have measured the dc ground current and it is also zero.

when you have a transmitter in your car are the rubber tires not
isolating the car body from ground?

You do not read my posts:
""The use of the term ground (or earth) is so common in electrical and
electronics applications that circuits in portable electronic devices such
as cell phones and media players as well as circuits in vehicles such as
ships, aircraft, and spacecraft may be spoken of as having a "ground"
connection without any actual connection to the Earth. This is usually a
large conductor attached to one side of the power supply (such as the
"ground plane" on a printed circuit board) which serves as the common return
path for current from many different components in the circuit."



do you get shocked after you have

been transmitting for a while and step out of your car?

It is common event.

where does

the ground current go when you have a plastic cased handheld radio?

To chassis. See the chassis ground.

i agree, mr. b is not as much fun as art... at least he made up things

that weren't so easy to observe as wrong, after all who could see the
waste deep levitating neutrinos jumping off their diamagnetic
antennas. mr. b's stuff is just absurd.

Radio was made by Stokes, Helmholtz and Tesla.
I try to remember it to you.
S*


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Galvanized iron - a poor ground plane? TF3KX Antenna 3 August 9th 06 11:48 AM
Aluminum welding wire (AlMg3) for radials on galvanized metal roof? TF3KX Antenna 1 August 9th 06 03:32 AM
Grounding Rods?? Lenny Shortwave 10 January 5th 06 07:08 PM
Ground rods.at HF Reg Edwards Antenna 30 September 8th 05 07:37 PM
WTB BIG STICK or 1/4 WAVE GOUND PLANE Marty B. CB 2 September 23rd 04 11:17 PM


All times are GMT +1. The time now is 10:25 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017