Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
On Jun 3, 7:41*am, Gary wrote:
On Jun 3, 5:15*am, david wrote: On Thu, 03 Jun 2010 10:08:15 +0200, -.-. --.- rearranged some electrons to say: Hello, my mobile setup is composed by a 2 meter vertical whip feeded immediately close to it by an automatic antenna tuner. My poor knowledge of antenna systems think that the ATU, choosing the appropriate LC value, bring the entire system in a resonant condition: true or false ? And , second question, because a friend of mine own a MFJ 269 analyzer, how i can *approximately* have an idea of the efficiency on a frequency F for my whip ? Thanks in advance, -.-. --.- The tuner will provide an impedance match to your transceiver (50 ohms).. * It won't make your antenna resonant on 20m (or any other band, other than 2m).- Hide quoted text - - Show quoted text - I think "CQ" meant the whip was 2 meters long. *That would be 1/4 wave on 38 MHZ if I did the math right. *This is the 8 M band? *The tuner might get it on 20 M, but 40 M will be a stretch. Gary N4AST Gary I hope your interpretation is correct. I used to operate a homebrew 2m 5/8 WL on 6 10 and 15 by shorting out the coil and using a tuner. Worked fairly decently for local rag chewing. Jimmie |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
10m - 40m non resonant vertical | Antenna | |||
Got my vertical resonant on 160 | Shortwave | |||
Resonant radials | Antenna | |||
Resonant and Non-resonant Radials | Antenna | |||
RESONANT ANTENNAS | Antenna |