| Home |
| Search |
| Today's Posts |
|
#6
June 20th 10, 04:28 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Direct connect 6 meter beam
On 6/19/2010 8:33 PM, tom wrote:
I have plans for a very good 6 element beam which is 15.53 feet from reflector to D4. I could scale it to the element taper you have if needed. It will not be a direct connect however, as those are almost never optimal designs for gain, F/B or pattern. They are optimized to be 50 ohms with the rest subservient to that. Most of the designs I have would be around 22 ohms so this one is probably in that area. A gamma match is easy to make. tom K0TAR Sorry, I should have looked before leaping, it's 5 elements on 15.5 feet. tom K0TAR |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: 2-Meter Beam | Swap | |||
| automatic (direct reading) SWR Meter | Homebrew | |||
| F.S. New 10 meter beam | CB | |||
| F.S. New 10 meter beam | Antenna | |||
| FS: 11 Meter Beam (10 Meter Trimmed?) | General | |||
Threaded Mode
