Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() "barett" wrote in message news:LHa5o.5855$7Z3.5790@hurricane... I am thinking of making a new antenna but in the info it talks about, if the SWR is high on the low part of the band. In the 20 meter band are they referring to 14.000Mhz end or the 14.350Mhz end of the band as being the low part of the band? Any help please. Thank you When talking about the swr and low end of the band, that is the lower frequency part of the band. In your example it would be the frequencies near 14.000. Frequencies near 14.350 would be the upper or high end of the band. It can be confusing as when you hear 'top band' referred to that is usually the 160 meter ham band. Guess that it got that way because the 160 meter is the highest ham band in meters even though it is the lowest in frequency. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Panasonic Multi-Band RF-5000 & Electro Brand World RangerMulti-Band w/cassette | Shortwave | |||
FS Kenwood TM 732 Dual Band, Standard C5900 Tri Band | General | |||
The 20m band is a band used by US drunkards | Policy | |||
FS Kenwood TM 732 Dual Band, Standard C5900 Tri Band | Swap | |||
TS-570 Mod for 60 M Band? | Equipment |