Quote below

REALITY CHECK: a form of a normal-mode, helical radiator is commonly used
for FM broadcast transmitting antennas. At their design frequencies, these
elements produce the same _measured_ field strength in their directions of
peak gain as produced by a matched, linear dipole in its directions of peak
gain (over the same path). Some of these FM helical designs have _measured_
input SWR less than 1.15:1 over 15% RF bandwidth, which is most of the
88-108MHz FM band. For the purpose, this performance is far from being
inefficient and/or narrow band.

NEC2 analysis of an FM normal-mode helix shows this, of course. Examples of
it are found in the slide show (item 10) at http://rfry.org .

Reading and heeding Kraus has to take the application into account.
Generalizations lead to misunderstanding.

RF
___________________

"Richard Harrison" wrote:
Larger omnidirectional (normal-mode) helices are used by some VHF/UHF
broadcasters to provide circular polarization, but Kraus says on page
173 of his 1950 edition of "Antennas":

"For normal mode the dimensions of the helix must be small compared to
the wavelength, so that from band width and efficiency considerations
this mode is not readily applicable in practice."

There are handie-talkie suppliers and broadcasters who don`t heed Kraus.