Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
On Oct 10, 1:13*pm, "Szczepan Bialek" wrote:
Uzytkownik "K1TTT" napisal w ... On Oct 10, 9:06 am, "Szczepan Bialek" wrote: Generally, 6-8 radials is the minimum that should be used." From: http://www.sgcworld.com/radialstechnote.html As you see in the radials are many ends. There is the lower voltage and almost no radiation (electron loss). Radial work like the receiver antena (caught electrons from air) Without the radials your stations can work only in a "salt-water swamp". yes, but how does the electron in a single radial know it is at the end of a radial and not double In each end the voltage has tendency to be doubled (standing wave). If you have radials and the LED you can measure the voltage. It will be lower in 10 radials than in 6. oh, so it does double at the end of a radial.. that is different from what you said earlier. as opposed to the electron at the end of an antenna that does double?? You know what to do to have low VSWR. Low VSWR means that the voltage is so high that the intensive emission of electrons take place. *At higher voltage the emission or sparks make low VSWR. S* oh, so the swr changes with transmitter power? that is an observable prediction that is obviously false... go back to square 1 and start your theory over again. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Easy way to learn English ***** download materials | Shortwave | |||
Antenna Building Materials | Antenna | |||
Reference Materials Wanted | Shortwave | |||
Reference Materials Wanted | Scanner | |||
RF transmission through various materials | Antenna |