Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 7th 10, 11:42 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jan 2010
Posts: 49
Default Ho-made non-inductive resitor WAS: Folded Dipole Antenna

On Mon, 06 Dec 2010 16:52:21 -0500, Nordic Breeds WA4VZQ rearranged some
electrons to say:



Jim is quite correct about the PVC pipe limiting the heat transfer. I
would suggest using power chip resistors. Digi-Key carries Bournes chip
resistors rated at 50 ohms and 100 watts for less than $8 each.

73, Dr. Barry L. Ornitz WA4VZQ



Amen on the thick-film chip resistors. I built a 200W dummy load using
two 100 ohm 100W devices in parallel.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A short coax-antenna with folded dipole characteristics. D. Heizinga Antenna 2 December 7th 08 02:51 PM
For Shortwave Listeners (SWLs) : Which is Better to Use ? a FM Folded Dipole Antenna ? -or- a Whip Antenna ? RHF Shortwave 0 July 28th 07 08:26 AM
Antenna Simulation Parameters and Folded Dipole Antenna Question... RHF Antenna 3 January 23rd 07 03:43 PM
Folded Dipole Antenna gavin Antenna 13 April 23rd 05 07:49 PM
Coaxial folded dipole (was: Natural balun/Antenna on 9/26/2004) John Smith Antenna 29 October 6th 04 02:44 AM


All times are GMT +1. The time now is 12:25 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017