LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old December 16th 10, 12:14 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Mar 2010
Posts: 61
Default Common Mode Noise Question

Hello,

Not too sharp with antenna and noise theory, so please bear with me a bit.

If I have a run of coax from a Balun right at my outside receiving only
antenna (well grounded at that point) right to my receiver, is it still
possible to have common-mode noise induced into the coax ?

Say from a PC, Modem, Router near the receiver.

Wouldn't the coax shied prevent this ?
If not, why not ?

Can't picture how an emi source field would/could "get-thru" the coax
shield to the inner conductor.

Thanks,
Bob
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Common Mode noise, some comments. [email protected] Shortwave 5 September 27th 07 12:05 PM
A different way to reduce common mode noise, [email protected] Shortwave 4 May 26th 07 08:59 PM
A different way to reduce common mode noise, addendum. [email protected] Shortwave 0 May 23rd 07 02:26 PM
Common Mode noise reduction [email protected] Shortwave 7 May 11th 06 09:22 PM
Common-Mode Noise . . . RHF Shortwave 0 November 25th 05 08:40 PM


All times are GMT +1. The time now is 05:14 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017