Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 10th 04, 05:24 AM
Reg Edwards
 
Posts: n/a
Default

The input impedance of any 5/8ths-wave whip or rod antenna is
approximately -

R - jX = 100 - j 350 ohms.

At 29 MHz, the bottom-end loading coil consists of 10 turns wound on a 1"
diameter, 1" long former.

This and information on other antenna heights can be found by downloading in
a few seconds program BOTLOAD2 from website below and running immediately.
----
.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Salt Water Ground Plane Vito Steockli Antenna 3 December 9th 03 04:54 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 03:14 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017