Home |
Search |
Today's Posts |
#5
|
|||
|
|||
On Tue, 20 Apr 2004 21:39:16 GMT, Ron wrote:
Can someone explain how a transmission line starts radiating as the separation between the center conductor and ground plane becomes greater and greater. Assume you out start with a wire over an infinite copper ground plane that forms a 50 ohm Zo transmission line. Then increase the distance between the wire and the ground plane until the wire becomes an end fed antenna. What happens to cause radiation to begin? Ron One of the pest explanations I know of can be found at: http://home.iag.net/~w2du/Reflection...nProblem. pdf 73 Danny, K6MHE |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Folded monopole dilemma | Antenna | |||
Radiation Resistance & Efficiency | Antenna | |||
A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
50 Ohms "Real Resistive" impedance a Misnomer? | Antenna |