Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Robert Kole wrote:
I know it's nit-picking and the tuner will handle it, I just want to know what's "correct". Your 3 1/3 inches is only about 0.3% of the total length. Whether the wire is insulated or not can make ten times that amount of difference but you didn't tell us what kind of wire you are using. Not only is it a nit, but it is a negligible nit compared to other nits. :-) -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Element Design with Loading Coils | Antenna | |||
Question on antenna symantics | Antenna | |||
70 ohm dipole to 50 ohm feed line question | Antenna | |||
Unequal length dipole arms | Antenna |