Home |
Search |
Today's Posts |
#1
|
|||
|
|||
A3S with 40 meter add on kit
Does the 40 meter addition change the 20 meter reflector beam to the center beam and the reflector
beam to 15 meters? I am assuming the A3S by itself works as the shortest beam is 10 meters the 15 meter beam is the middle and the 20 meter as the longest? TIA |
#2
|
|||
|
|||
A3S with 40 meter add on kit
On Mon, 23 May 2011 16:29:57 -0400, "D@LS" /
wrote: Does the 40 meter addition change the 20 meter reflector beam to the center beam and the reflector beam to 15 meters? I am assuming the A3S by itself works as the shortest beam is 10 meters the 15 meter beam is the middle and the 20 meter as the longest? TIA The Cushcraft A3S beam has 3 elements. The driven element is setup to be used as a rotatable dipole on 40 meters. It works a lot better than it sounds. The spacing of the elements on the boom does not change. |
#3
|
|||
|
|||
A3S with 40 meter add on kit
On Sat, 28 May 2011 20:47:09 -0400, W8CCW wrote:
On Mon, 23 May 2011 16:29:57 -0400, "D@LS" / wrote: Does the 40 meter addition change the 20 meter reflector beam to the center beam and the reflector beam to 15 meters? I am assuming the A3S by itself works as the shortest beam is 10 meters the 15 meter beam is the middle and the 20 meter as the longest? TIA The Cushcraft A3S beam has 3 elements. The driven element is setup to be used as a rotatable dipole on 40 meters. It works a lot better than it sounds. The spacing of the elements on the boom does not change. Thanks. Between the Rotor and the A3s/ and the Dipole getting it up to 40ft should be a real pain. |
#4
|
|||
|
|||
A3S with 40 meter add on kit
On Sun, 29 May 2011 09:30:27 -0400, "D@LS" /
wrote: On Sat, 28 May 2011 20:47:09 -0400, W8CCW wrote: On Mon, 23 May 2011 16:29:57 -0400, "D@LS" / wrote: Does the 40 meter addition change the 20 meter reflector beam to the center beam and the reflector beam to 15 meters? I am assuming the A3S by itself works as the shortest beam is 10 meters the 15 meter beam is the middle and the 20 meter as the longest? TIA The Cushcraft A3S beam has 3 elements. The driven element is setup to be used as a rotatable dipole on 40 meters. It works a lot better than it sounds. The spacing of the elements on the boom does not change. Thanks. Between the Rotor and the A3s/ and the Dipole getting it up to 40ft should be a real pain. It is about the same size & weight as other multiband beams. The 40 M add on seems pretty expensive but I do use it a lot. Also, Mine is mounteds on a tilt-over, crank up from the late 1970's. Two electric winches, no sweat for an old man. Also, there is a Homebrew tilt mechanism... You can check it out at http://dixienc.us/TiltOverGadget/TiltOverGadget.htm I have also found it useful on WARC bands simply by using a tuner. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|