Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
RadioBanter
»
rec.radio.amateur
»
Antenna
>
PCB costs
LinkBack
Thread Tools
Search this Thread
Display Modes
Prev
Next
#
3
April 29th 04, 08:32 AM
basketball_jones
Posts: n/a
Two more things:
Assume very high, production volume so setup, tooling etc. are not a factor.
There is only one hole.
Many thanks.
(basketball_jones) wrote in message . com...
Hello,
I am working on a PCB-based antenna, with copper on both sides.
Believe it or not, the hardest part is figuring out how much the PCB
material would cost. Does anyone have any PCB costing numbers for
FR4, FR408, Nelco 40013, Rogers 4003, any other material? I
understand that thickness plays a major part in the cost so if
possible please include the board thickness with the cost number (I am
currently thinking of using 20mils thick PCB). It would probably be
easiest if the cost was in units of US$ per sq. inch or sq. cm. Many
thanks.
Reply With Quote
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Switch to Hybrid Mode
Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
On
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
All times are GMT +1. The time now is
06:33 PM
.
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
Contact Us
RadioBanter forum home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks