LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old May 10th 04, 12:17 AM
JGBOYLES
 
Posts: n/a
Default

You have choices here, and I don't much care for generalities that
unnecessarily limit the choices. Just because one person wants to use
a tuner, and retune after any QSY greater than 20kHz doesn't mean
another who wants to use a broadband system should be discouraged from
doing so.

Hi Tom,
The thread was "wire thickness versus bandwidth" As you know, to scale an
antenna from one frequency to another, you need to scale the wire diameter as
well. This will keep the bandwidth pretty much the same.
I thought I was commenting on the bandwidth as one changes the frequency and
length of an antenna, but keep the effective wire diameter constant. Of course
if you vary the effective diameter, 3 parallel pieces of #8 a foot apart on 1.8
mhz, you change the effective bandwidth.

you have choices here, and I don't much care for generalities that
unnecessarily limit the choices.

I did not mean to be general and limit choices, sorry.

73 Gary N4AST
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding lengths to bare wire antenna? Ken Antenna 8 May 3rd 04 03:03 PM
Excessive RF Exposure from Long Wire? jj Antenna 22 February 13th 04 10:32 PM
randon wire newbie question lethal Antenna 4 February 7th 04 11:01 AM
Open Wire Feeder Switching Ideas ? DOUGLAS SNOWDEN Antenna 4 December 30th 03 07:37 PM
Feedpoint impedence / wire diameter Tom Bruhns Antenna 0 July 10th 03 08:23 PM


All times are GMT +1. The time now is 09:28 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017