LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old May 12th 04, 02:07 PM
Reg Edwards
 
Posts: n/a
Default

For a 5/8-wave vertical above ground at 24 MHz, conductor diameter 10 mm. -

Base feedpoint resistance = 110 ohms
Base feedpoint reactance = -j386 ohms
Base loading coil inductance = 2.6 uH
Coil diameter = 25 mm
Coil length = 33 mm
Number of spaced turns = 13
Wire = 14 awg = 1.64 mm diameter.

For other heights, frequencies and coil dimensions download in a few seconds
program BOTLOAD for immediate answers.
----
.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Plans for a 5/8 wave 2M ground plane George Cronk Antenna 21 April 6th 04 10:14 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 08:18 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017