Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
Reg Edwards wrote:
Reflected power is a mere fiction. Power which is not radiated from an antenna never actually arrives there. In fact it never leaves the transmitter. Therefore, radar cannot work since it relies upon reflected joules/second. Mirrors also cannot work since there is an ExB amount of power in those reflections. Reg, for a 291.5 ohm antenna to accept 100 watts requires the forward power to the antenna to be 200 watts. 100 watts is accepted by the antenna and 100 watts is rejected by the antenna. 200 watts to the antenna is routinely accomplished by a 100 watt ham transmitter and a Z0-match provided by a tuner. This is exactly like a partially silvered mirror that reflects half the irradiance and allows half the irradiance through. Assume a one second long lossless unterminated transmission line. Pour 1000 watts into it for one second. During the next second, we disconnect the line from the source and you grab the two wires, one in each hand. Then tell us whether reflected power exists or not. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna |