Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() Tam/WB2TT wrote: "Jim Kelley" wrote in message ... Cecil Moore wrote: Tam/WB2TT wrote: You can get the same answer from knowing that the impedance looking into a 1/4 wave section of shorted transmission line is infinite. Ever measure the forward and reflected currents halfway into a shorted 1/4WL stub? How can currents be flowing unimpeded into and out of an infinite impedance? The question is a little misleading because the direction of the flow of current changes every half cycle and is transverse, or orthogonal to the direction of wave propagation. In a transmission line, the current flows through Z0, ostensibly, which is essentially the impedance from one conductor to the other at every point along the transmission line. Other than that, superposed forward and reflected waves behave just as you described, naturally. 73, Jim AC6XG There is no current in the steady state. The steady state voltage is independent of source impedance, which affect only how long it takes to reach that. I ran a simulation on this, and you can see that as the voltage builds up, the current decreases Tam Hi Tam, The simulation would be fun to play with. What do you use? 73 de jk |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna |