| Home |
| Search |
| Today's Posts |
|
#17
|
|||
|
|||
|
Henry Kolesnik wrote:
I'm probably not the only one that is getting an adequate fill of facts, opinions and quotes. I have only one request. Does anyone have verifiable and repeatable evidence that a properly tuned pi network final amplifier without a tuner does or does not dissipate power when there are reflections? If they do can they please direct us to the source or give us an easliy understandable write up. Hank, when reflected current flows backwards through a pi-net loading coil, some of the reflected power is dissipated as I^2*R losses in the coil. Other than that, a properly tuned pi-net causes a match point that reflects all the reflected energy back toward the load. If a match point exists in a ham radio antenna system, no reflected energy will reach the source. This is the great majority of amateur radio systems and no-reflections-at-the-source is the goal of every ham. The thing that you are worried about is the unusual case where reflections are allowed to reach the source. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo | Antenna | |||
| Derivation of the Reflection Coefficient? | Antenna | |||
| Length of Coax Affecting Incident Power to Meter? | Antenna | |||